How to Install a Kitchen Faucet

Installing a new kitchen faucet may seem intimidating, but with the right tools and a little patience, it’s a task you can handle. Learning how to install a kitchen faucet can save you money and give your kitchen an updated look. By following this guide, you’ll have your new faucet installed in no time.

Before starting the installation process, make sure you have all the necessary tools and materials. This preparation will make the process smoother and prevent unnecessary delays. Here’s what you’ll need:

• A basin wrench
• An adjustable wrench
• Teflon tape
• Bucket or towel
• New faucet kit

The first major step is removing your old faucet. Start by turning off the water supply valves under the sink. Once you’ve done that, open the faucet to relieve any remaining pressure in the lines. Then, use your basin wrench to loosen and remove the nuts securing the faucet to the sink.

With your old fixture removed, you’re ready to install the new faucet. Align it properly with the mounting holes on your sink. Use the hardware provided with your new faucet kit to secure it in place. Make sure everything is tightly fastened to avoid leaks later on.

This step involves connecting the water supply lines to your new faucet. Wrap Teflon tape around each threaded end to ensure a tight seal. Attach each line carefully, ensuring hot and cold lines do not get mixed up. Once connected, turn on the water supply valves and check for any leaks.

After installing the faucet and connecting the water lines, it’s time to test your work. Turn on the faucet and let both hot and cold water run for a minute. Check underneath for any drips or leaks. This final testing ensures that everything is working as it should.

If you’re located in Holly Springs, NC, you don’t have to tackle this project alone. We offer professional services to assist with all your plumbing needs. Contact Metro Rooter Plumbing - Holly Springs at (919) 244-5638 to schedule an appointment today and avoid future faucet repair projects.